Ignition Stick Coil for Arctic Cat Bearcat, Trail, Panther & 660 Turbo 2002-2008
Ignition Stick Coil for Arctic Cat Bearcat, Trail, Panther & 660 Turbo 2002-2008
SKU:RM06039-S320
Free shipping over £150. Terms apply
Couldn't load pickup availability
Ignition Stick Coil - RM06039-S320
Arctic Cat Trail, Bearcat, Panther 660 and T 660 Turbo - 2002-2008
This is a brand new ignition stick coil for the Arctic Cat 660 range, supplied as a direct replacement to your original unit. A stick coil - sometimes called a cap coil or pencil coil - combines the ignition coil and the spark plug cap into a single component that sits directly in the plug well and pushes onto the plug terminal. Building the coil into the cap removes the high-tension lead entirely, which cuts energy losses and eliminates one of the most common places for a spark to leak away. The trade-off is that when the cap end wears, the whole assembly has to be renewed.
The quality of this coil exceeds the OEM equipment it replaces. It delivers an ultra high output spark for smooth engine operation and uses efficient power transfer connections throughout. Physically it matches the original: 131 mm long, with a 10 mm internal tube diameter to seat correctly on the plug, a 21 mm seal to keep water and debris out of the plug well, one plug and three terminals. That makes it a straight swap - the old coil pulls out of the plug well, the loom connector unclips, and the new coil goes in with no cutting, splicing or modification.
Key Features
- Brand new ignition stick coil
- Direct replacement to your original unit
- Ultra high output spark
- Smooth engine operation
- Efficient power transfer connections
- Quality exceeds the OEM equipment
- 21 mm seal protects the plug well from water and debris
- Cross references three Arctic Cat OEM part numbers
Technical Specs
| Specification | Detail |
|---|---|
| Part code | RM06039-S320 |
| Component type | Ignition stick coil / cap coil |
| Length | 131 mm |
| Internal tube diameter | 10 mm |
| Seal | 21 mm |
| Number of plugs | 1 |
| Number of terminals | 3 |
| Installation | Direct replacement |
Vehicle Fitment Guide
Years shown are the overall coverage span for this part. Please confirm against the OEM part number on your original unit before ordering.
| Make & Model | Years |
|---|---|
| Arctic Cat Trail | 2002-2008 |
| Arctic Cat Bearcat | 2002-2008 |
| Arctic Cat Panther 660 | 2002-2008 |
| Arctic Cat T 660 Turbo | 2002-2008 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 3006-280 | Arctic Cat |
| 3007-402 | Arctic Cat |
| 3007-590 | Arctic Cat |
Frequently Asked Questions
Do I need to modify anything to fit it?
No. It is a direct replacement to your original unit. The 131 mm length, 10 mm internal tube diameter and 21 mm seal all match the factory coil, and the single plug with three terminals connects to the standard loom, so no cutting or splicing is involved.
What is included?
One brand new ignition stick coil. Because the coil and the plug cap are a single assembly, there is no separate cap or high-tension lead to fit - the coil goes straight into the plug well.
How can I tell my old stick coil has failed?
Typical signs are a misfire on one cylinder, hard starting, rough running that clears at higher revs or gets worse when the engine is hot, and a noticeable loss of power under load. Swapping the suspect coil to another cylinder and seeing the misfire follow it is the quickest confirmation. Look also for cracks, tracking marks or a perished seal on the cap end - a coil that lets water into the plug well will misfire in damp conditions long before it fails outright.
Should I replace all the coils at the same time?
Not necessarily, but on a machine of this age the coils have all done the same hours in the same conditions, so when one fails the others are often close behind. If you are already stripping the top of the engine to reach them, replacing the set can save a repeat job.
Share
