Ignition Coil for Polaris Sportsman, Ranger & Honda TRX 1996-2019
Ignition Coil for Polaris Sportsman, Ranger & Honda TRX 1996-2019
SKU:RM06158
Free shipping over £150. Terms apply
Couldn't load pickup availability
Ignition Coil for Polaris & Honda ATV / UTV Models
Polaris Sportsman, Ranger, Big Boss & Honda TRX, CR, CRF, 1996-2019
This ignition coil is a direct replacement across a wide range of Polaris ATVs and UTVs and Honda motorcycles and ATVs, built to OEM specifications for correct fit, function and spark output.
It uses a 35mm bracket hole spacing and a 760mm wiring loom to reach the factory harness, giving a straightforward swap for a weak, cracked or failed original coil without modification.
Key Features
- Direct OEM fit across the listed Polaris and Honda models
- 35mm bracket center-to-center mounting spacing
- 760mm wire length to reach the factory harness
- 0.6 ohm coil resistance
- 12-month warranty as standard
Technical Specs
| Specification | Detail |
|---|---|
| Height | 52 mm |
| Length | 72 mm |
| Width | 44 mm |
| Wire Length | 760 mm |
| Fixation Holes Center-to-Center | 35 mm |
| Resistance | 0.6 ohms |
Vehicle Fitment Guide
Years shown are the overall coverage span for this part. Please confirm against the OEM part number on your original unit before ordering.
| Make & Model | Years |
|---|---|
| Honda CR 125 R & CR 250 R | 2000-2007 |
| Honda CRF 150 F, 230 F, 450 R & 450 X | 2002-2019 |
| Honda TRX 400-650 ATVs | 2003-2019 |
| Polaris Sportsman 400 & 500 | 1996-2004 |
| Polaris Big Boss, Magnum, Xplorer, Worker & Outlaw | 1997-2008 |
| Polaris Ranger & Series 10/11 UTVs | 2002-2008 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 3085227 | Polaris |
| 3085228 | Polaris |
| 4011669 | Polaris |
| 30500-KPS-900 | Honda |
| 30500-KR8-751 | Honda |
| 30500-HP0-A01 | Honda |
| 30500-HP0-A71 | Honda |
| 30500-HP1-003 | Honda |
| 30500-HN7-003 | Honda |
| 30500-KZ4-J21 | Honda |
| 30500-KZ4-J31 | Honda |
| 30500-MEB-671 | Honda |
| 30500-HN8-003 | Honda |
| 30500-MEB-670 | Honda |
Frequently Asked Questions
Will this fit without modification?
Yes, it uses the factory bracket spacing and wiring connector for the listed models, so no cutting or splicing is required.
What's included?
One ignition coil, ready to fit in place of the original unit.
How can I tell my old coil has failed?
Common symptoms include a weak or no spark, hard starting, misfiring, or the engine cutting out under load.
My model is not listed above - will this still fit?
Please check the OEM part numbers above against your original coil before ordering to confirm compatibility.
Share
