Ignition Stick Coil for Honda CRF 250 R and CRF 250 X - RMS260-104931
CRF 250 R 2004-2009 | CRF 250 X 2004-2009, 2012, 2013, 2015-2017 | OEM 30700-KRN-671
Brand new ignition stick coil supplied as a direct replacement for the original unit fitted to the Honda CRF 250 R and CRF 250 X. The stick coil sits directly on top of the spark plug and combines the coil and plug cap into one sealed component, which is why a worn or cracked unit has to be replaced complete rather than repaired.
The quality exceeds the OEM equipment and all shipped products are tested before they leave the factory. One cap coil is included. If your OEM part is defective, RM Stator offers good quality replacement parts at a fraction of the price of the original component, which makes this an economical way to restore a clean, consistent spark on a hard starting or misfiring CRF 250.
Key Features
- Brand new ignition stick coil
- Direct replacement for your original unit
- Quality exceeds the OEM equipment
- 1 cap coil included
- All shipped products are tested
- Small tip design as fitted to the CRF 250
- Replaces Honda OEM 30700-KRN-670 and 30700-KRN-671
- Fraction of the price of the genuine part
Technical Specs
| Specification |
Detail |
| Part number |
RMS260-104931 |
| Length |
120 mm |
| Interior seal |
10 mm |
| Exterior seal |
18 mm |
| Number of plugs |
1 |
| Number of terminals |
2 |
| Resistance |
0.5 ohms |
| Tips |
Small |
Vehicle Fitment Guide
| Make & Model |
Years |
| Honda CRF 250 R |
2004-2009 |
| Honda CRF 250 X |
2004-2009, 2012, 2013, 2015-2017 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number |
Manufacturer / Brand |
| 30700-KRN-670 |
Honda |
| 30700-KRN-671 |
Honda |
Frequently Asked Questions
Does it fit straight on without modification?
Yes. It is a direct replacement for the original unit on the Honda CRF 250 R and CRF 250 X in the model years listed above. Check that your original carries Honda part number 30700-KRN-670 or 30700-KRN-671 before ordering.
What is included?
One cap coil is included. That is the complete stick coil assembly, part number RMS260-104931, ready to push onto the spark plug and reconnect.
How do I know the old stick coil has failed?
Hard starting, a weak or intermittent spark, misfiring under load and a bike that cuts out when hot are the usual signs. The stick coil sits in the plug well where it is exposed to heat and moisture, so the seals and the internal winding are the parts that give up first.
Can I test the coil before replacing it?
Yes. This unit is specified at 0.5 ohms, so measuring the resistance across the terminals of your original coil and comparing the reading against that figure will usually confirm whether the winding has failed.
Dispatched from the UK · 12-month warranty · Fitment support from our technical team
