Skip to product information
1 of 8

Liqui Moly Motorbike Engine Flush 250ml 1638 4-Stroke Engine Cleaner Additive

Liqui Moly Motorbike Engine Flush 250ml 1638 4-Stroke Engine Cleaner Additive

SKU:210.1657

Regular price £15.19 GBP
Regular price £18.23 GBP Sale price £15.19 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.

Free shipping over £150. Terms apply

Liqui Moly Motorbike Engine Flush 250ml

Professional Engine Interior Cleaning Treatment

Liqui Moly Motorbike Engine Flush is a highly effective cleaning fluid designed to clear the engine interior of troublesome deposits and sludge. By dissolving lacquer formers and bringing residues into suspension, it ensures that contaminants are fully removed during the oil change. This process allows your fresh motor oil to perform at its full potential without being contaminated by old residues.

PERFORMANCE: Restores engine performance, improves compression, and extends service life by cleaning vital oil circuits.

Key Features

  • ✔ Safe for wet clutches
  • ✔ Tested with catalytic converters
  • ✔ Does not attack common seal materials
  • ✔ Rapid cleaning (10-minute idle time)
  • ✔ Highly economical: 250ml treats 4.5L of oil

Technical Specs

SKU / MPN: 1638
Density at 20°C: 0.805 g/cm³
Viscosity at 40°C: 24.12 mm²/s
Flash Point: 61 °C
Base: Additive / Carrier liquid
Volume: 250 ml

Compatibility / Fitment Guide

Engine Type Application Notes
4-Stroke Gasoline All Motorbikes / Scooters Safe for manual transmissions
Wet Clutch Systems Motorcycles with oil-bath clutches Fully compatible; does not cause slipping
Exhaust Systems Catalytic Converters No negative impact on emissions systems

Reference Part Numbers

Liqui Moly SKU 1638 / 1657 / 21717 / 20050
EAN 4100420016578

Questions & Answers

Is this safe for motorcycles with a wet clutch?

Yes, Liqui Moly Motorbike Engine Flush is specifically formulated for 4-stroke motorcycle engines and has been extensively tested for compatibility with wet clutch systems. It will not cause clutch slippage when used as directed.

How do I use this product?

Add the 250ml contents to your warm engine oil before your scheduled oil change. Allow the engine to idle for approximately 10 minutes (do not drive). If you have a manual transmission, pull the clutch lever several times during idling. Then, drain the oil and replace the filter as usual.

How much oil does one can treat?

One 250ml can is sufficient for oil systems with a capacity between 3.0 and 4.5 litres.

Note: Professional grade additive. For 4-stroke gasoline engines only. Always follow your vehicle manufacturer's oil change intervals. Visit 4drive.co.uk for more premium maintenance parts.

View full details
Shipping calculated at checkout. Free shipping over £150. Terms apply