Power Window Switch for Can-Am Defender
Defender HD5, HD8, HD10, HD9 and Max HD8 / HD10 - 2016 to 2023
This is a brand new power window switch, supplied as a direct replacement for the original unit fitted to the Can-Am Defender. It matches the original in size, in shape and in its 6-pin connection, so it drops straight into the existing switch panel aperture and plugs into the standard loom. Every unit is tested before it is shipped.
Switches in a side-by-side lead a hard life. Dust, mud, pressure washing and the constant vibration of a working machine all take their toll on the internal contacts, and a switch that has started to stick, to work only in one direction, or to need a firm push before the glass moves is usually beyond cleaning. Replacing the switch is a far quicker job than stripping the door to reach the motor, and it is the first thing to check when a window stops responding. All item pictures are accurate; if you are in any doubt, compare the item shown against your original part before ordering.
Key Features
- Brand new power window switch
- Direct replacement for your original unit
- Matches the original 6-pin connection
- No modification to the switch panel or loom required
- All products shipped are tested
- All item pictures are accurate - compare against your original part if in doubt
Technical Specs
| Specification |
Detail |
| Part number |
RMS899-107876 |
| Height |
52 mm |
| Length |
49 mm |
| Width |
25 mm |
| Number of pins |
6 |
Vehicle Fitment Guide
| Make & Model |
Years |
| Can-Am Defender HD5 |
2017 |
| Can-Am Defender HD8 |
2016-2023 |
| Can-Am Defender HD10 |
2016-2023 |
| Can-Am Defender Max HD8 |
2018-2023 |
| Can-Am Defender Max HD10 |
2018-2023 |
| Can-Am Defender HD9 |
2022-2023 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number |
Manufacturer / Brand |
| 705800048 |
Can-Am |
| 710004979 |
Can-Am |
Frequently Asked Questions
Does this switch fit without modification?
Yes. It is a direct replacement for the original unit on the Defender models listed above and shares the same body dimensions and 6-pin connection, so it fits the original panel aperture and plugs into the existing loom. No cutting or splicing is required.
What is supplied?
This listing is for the power window switch itself. Because it uses the same 6-pin connection as the original, no additional wiring, adapters or hardware are needed to fit it.
How do I tell whether the switch or the window motor has failed?
A failed switch normally affects one window only, and often only in one direction - the glass will go down but not up, or it needs the rocker held at an angle before it moves. If the motor itself has failed the window will usually be dead in both directions and no sound comes from inside the door when the switch is pressed. Checking continuity across the switch pins as it is operated will confirm which of the two is at fault.
How do I make sure it is the right switch for my machine?
Check your Defender against the fitment table above and compare the OEM numbers 705800048 and 710004979 against the number moulded or printed on your original switch. The photographs on this listing are accurate, so a direct visual comparison with the part you are removing is also a reliable check.
Dispatched from the UK · 12-month warranty · Fitment support from our technical team
