Regulator Rectifier for Kawasaki Ninja ZX-9R 1998-1999 RM30927
Regulator Rectifier for Kawasaki Ninja ZX-9R 1998-1999 RM30927
SKU:RM30927
Free shipping over £150. Terms apply
Couldn't load pickup availability
Voltage Regulator Rectifier RM30927 for Kawasaki Ninja ZX-9R
Kawasaki Ninja ZX 9 R - 1998 and 1999 - OEM 21066-1109
Brand new voltage regulator rectifier, supplied as a direct replacement for the original unit fitted to the Kawasaki Ninja ZX 9 R in 1998 and 1999. It is a plug-and-play, direct fit part - no assembly is required and no modification to the standard wiring loom is needed. The unit is built with a higher grade of electrical components than the original and uses an improved heat sink for better thermal performance and charging capability. The quality exceeds the OEM equipment, and all shipped products are tested.
The regulator rectifier converts the alternating current produced by the stator into direct current and holds the charging voltage at a level that is safe for the battery and the rest of the electrical system. This is a high output unit rated at a maximum charging current of 50 A / 500 W, with a minimum charging voltage of 14.5 V +/- 0.5 V and open circuit voltage held below 15 V. When the original unit fails the usual symptoms are a battery that will not hold charge, a battery that boils or gasses, dim or flickering lights, or a charging voltage that either never rises above resting battery voltage or climbs well past 15 volts.
Key Features
- Direct replacement for the original unit
- Plug-and-play, direct fit, easy installation
- No assembly required
- Improved heat sink and charging capabilities
- Higher grade of electric components
- Quality exceeds the OEM equipment
- All shipped products are tested
- High output - 50 A / 500 W
Technical Specs
| Specification | Detail |
|---|---|
| Part number | RM30927 |
| Width | 110 mm |
| Length | 80 mm |
| Height | 27 mm |
| Wires length | 155 mm |
| Fixation holes, centre to centre | 80 mm |
| Number of plugs | 1 |
| Number of pins | 6 |
| Number of wires | 8 |
| Minimum charging voltage | 14.5 V +/- 0.5 V |
| Maximum charging current | 50 A / 500 W |
| Open circuit voltage | Less than 15 V |
| Operating temperature | -20 °C to 85 °C |
Vehicle Fitment Guide
| Make & Model | Years |
|---|---|
| Kawasaki Ninja ZX 9 R | 1998, 1999 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 21066-1109 | Kawasaki |
Frequently Asked Questions
Do I need to modify the wiring to fit this unit?
No. This is a plug-and-play, direct fit replacement for the original unit and no assembly is required. It uses a single plug with 6 pins, and the harness carries 8 wires of 155 mm.
What is supplied?
One brand new voltage regulator rectifier, part number RM30927, tested before dispatch. No additional connectors or fitting hardware are listed with this part.
How do I tell whether my old regulator rectifier has failed?
Measure the voltage across the battery terminals with the engine running and warm. A healthy charging system should show around 14.5 V. A reading that stays at resting battery voltage suggests the unit is no longer charging, while a reading above 15 V suggests it is no longer regulating and is overcharging the battery.
Will it fit the original mounting position on the ZX-9R?
Yes. The body measures 110 mm by 80 mm by 27 mm and the fixation holes are 80 mm apart centre to centre, matching the original mounting on the 1998 and 1999 Ninja ZX 9 R.
Share
