Regulator Rectifier for Kawasaki JS 750 & JS 800 1992-2012
Regulator Rectifier for Kawasaki JS 750 & JS 800 1992-2012
SKU:RM30Y07
Free shipping over £150. Terms apply
Couldn't load pickup availability
AC Voltage Regulator Rectifier RM30Y07 for Kawasaki
Kawasaki 750 SX, SXI, SXI Pro, SXI 75 HP and 800 SX-R - 1992-2011
Brand new improved AC voltage regulator rectifier, supplied as a direct replacement for the original unit fitted to the Kawasaki 750 SX, SXI, SXI Pro and SXI 75 HP stand-up skis and the 800 SX-R from 1992 to 2011. It is a plug-and-play, direct fit part - no assembly is required and no modification to the standard wiring loom is needed. The connector is included. The unit is built with a higher grade of electrical components than the original and uses an improved heat sink for better thermal performance and charging capability. The quality exceeds the OEM equipment, and every unit is tested before it is shipped.
This is an AC regulator rectifier, which controls the output of the charging coils and holds the electrical system at a safe voltage. On a stand-up ski the unit lives in a hot and damp engine bay and is a common failure point. When it fails the usual symptoms are a battery that will not hold charge between outings, a battery that boils or gasses, or a charging voltage that either never rises above resting battery voltage or climbs well past 15 volts. This unit delivers a minimum charging voltage of 14.5 V +/- 0.5 V and a maximum charging current of 25 A / 300 W, with open circuit voltage held below 15 V.
Key Features
- Brand new improved AC regulator rectifier
- Direct replacement for the original unit
- Plug-and-play, direct fit, easy installation
- No assembly required
- Connector included
- Improved heat sink and charging capabilities
- Higher grade of electric components
- Quality exceeds the OEM equipment
- All products shipped are tested
Technical Specs
| Specification | Detail |
|---|---|
| Part number | RM30Y07 |
| Width | 60 mm |
| Length | 70 mm |
| Height | 25 mm |
| Wires length | 120 mm |
| Distance between fixation holes | 55 mm |
| Number of plugs | 1 |
| Number of pins | 6 |
| Number of wires | 6 |
| Minimum charging voltage | 14.5 V +/- 0.5 V |
| Maximum charging current | 25 A / 300 W |
| Open circuit voltage | Less than 15 V |
| Operating temperature | -20 °C to 85 °C |
Vehicle Fitment Guide
Years shown are the overall coverage span for this part. Please confirm against the OEM part number on your original unit before ordering.
| Make & Model | Years |
|---|---|
| Kawasaki 750 SX | 1992-2011 |
| Kawasaki 750 SXI | 1992-2011 |
| Kawasaki 750 SXI Pro | 1992-2011 |
| Kawasaki 750 SXI 75 HP | 1992-2011 |
| Kawasaki 800 SX-R | 1992-2011 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 21066-3709 | Kawasaki |
| 21066-0799 | Kawasaki |
Frequently Asked Questions
Do I need to modify the wiring to fit this unit?
No. This is a plug-and-play, direct fit replacement for the original unit and no assembly is required. It uses a single plug with 6 pins and 6 wires of 120 mm.
What is supplied?
One brand new improved AC voltage regulator rectifier, part number RM30Y07, with the connector included. Every unit is tested before dispatch.
How do I tell whether my old regulator rectifier has failed?
Measure the voltage across the battery terminals with the engine running. A healthy charging system should show around 14.5 V. A reading that stays at resting battery voltage suggests the unit is no longer charging, while a reading above 15 V suggests it is no longer regulating and is overcharging the battery.
Will it fit the original mounting position?
Yes. The body measures 60 mm by 70 mm by 25 mm and the fixation holes are 55 mm apart, matching the original mounting.
Share
