Starter Motor for Baja Dingo Falcon 150cc GY6 ATV Go-Kart 9-Spline 12V 410-58005
Starter Motor for Baja Dingo Falcon 150cc GY6 ATV Go-Kart 9-Spline 12V 410-58005
SKU:410-58005
Free shipping over £150. Terms apply
Couldn't load pickup availability
Starter Motor | Baja Dingo Falcon 150cc
Premium Quality Replacement Part for GY6 Engines
This high-performance starter motor is a direct replacement for 150cc 4-stroke Chinese engines, specifically engineered for the Baja Motorsports, Kazuma, and TaoTao lines. Designed as a PMDD (Permanent-Magnet Direct-Drive) unit, it provides the necessary torque for rapid engine ignition in all weather conditions.
Key Features
- ✔ Direct Fit: Standard 2-bolt mounting
- ✔ High Torque: 9-Tooth spline drive
- ✔ Durability: Sealed PMDD construction
- ✔ Ready to Install: Single-post terminal
Technical Specs
| Voltage | 12V |
| Rotation | Clockwise (CW) |
| Spline Count | 9 Teeth |
| Bolt Spacing | 78mm - 79mm |
| Type | PMDD |
Compatibility / Fitment Guide
| Manufacturer | Model Application | Engine |
|---|---|---|
| Baja Motorsports | Dingo 150 (DN150), Falcon 150 (FL150) | 150cc GY6 |
| Baja Motorsports | Reaction 150 (BR150), Dune 150, SC150 | 150cc GY6 |
| Kazuma | Dingo 150, Falcon 150 | 150cc GY6 |
| Hammerhead | GT150, GTS150, Mudhead | 150cc GY6 |
| TaoTao / Coolster | Most 150cc ATVs & Go-Karts (e.g. 3150DX) | 125cc/150cc |
OEM Cross Reference
| Arrowhead | SCH0004 |
| Lester | 19574 |
| WAI / J&N | 19574N / 410-58005 |
| Baja OEM | DN150-311, BR150S-499 |
| Hammerhead | MT150-1064000 |
Questions & Answers
Is this a genuine original part?
This is a premium quality aftermarket replacement part from 4Drive, manufactured to meet or exceed original equipment (OE) standards for fitment and performance.
How do I know if it is compatible?
Check the spline count (9 teeth) and the bolt spacing (approx 78mm). If your current motor matches these specs or is from a 150cc GY6 engine, this is the correct part.
Does it come with the wiring harness?
No, this unit features a single-post terminal connection. You should reuse your existing starter cable and mounting bolts during installation.
Note: Please verify your original part number against the references above at 4drive.co.uk before purchasing.
Share
