Starter Relay Solenoid for Kawasaki Ultra 150 JH 1200 1999-2005 - Replaces 27010-3757
Starter Relay Solenoid for Kawasaki Ultra 150 JH 1200 1999-2005 - Replaces 27010-3757
SKU:RMS090-102357
Free shipping over £150. Terms apply
Couldn't load pickup availability
Starter Relay Solenoid Switch
Kawasaki Ultra 150 JH 1200 cc · 1999-2005 · Replaces 27010-3757
This is a brand new starter relay solenoid switch, part number RMS090-102357, built as a direct replacement for the original unit fitted to the Kawasaki Ultra 150 JH 1200 cc from 1999 to 2005. The starter solenoid is the heavy duty switch that connects the battery to the starter motor. Pressing the start button sends only a small current to the solenoid coil, and the solenoid then closes the high current path that turns the engine over, so it carries the full cranking load every time the machine is started.
The unit measures 92 mm long, 59 mm wide and 43 mm high, with five wires, five terminals and two plugs, matching the original layout so the standard harness plugs straight in. The quality exceeds the OEM equipment and all products shipped are tested. All item pictures are accurate; if in doubt, compare the item against your original part before fitting.
Key Features
- Brand new starter relay solenoid switch
- Direct replacement for the original unit
- Quality that exceeds the OEM equipment
- Five wires, five terminals and two plugs, matching the original
- Cross references to Kawasaki 27010-3757
- All products shipped are tested
Technical Specs
| Specification | Detail |
|---|---|
| Part number | RMS090-102357 |
| Height | 43 mm |
| Length | 92 mm |
| Width | 59 mm |
| Number of wires | 5 |
| Number of terminals | 5 |
| Number of plugs | 2 |
Vehicle Fitment Guide
Years shown are the overall coverage span for this part. Please confirm against the OEM part number on your original unit before ordering.
| Make & Model | Years |
|---|---|
| Kawasaki Ultra 150 JH 1200 cc | 1999-2005 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 27010-3757 | Kawasaki |
Frequently Asked Questions
Will this fit without modification?
Yes. It is a direct replacement for the original solenoid and repeats the same five wires, five terminals and two plugs, so no cutting or splicing is required.
What is included?
One starter relay solenoid switch. No additional hardware is listed for this part.
How do I know the old solenoid has failed?
A single click with no crank while the battery is fully charged, rapid clicking, or starting that only works intermittently are the usual indications. Burnt or corroded terminals on the solenoid body support the same diagnosis.
Any safety points when fitting it?
Yes - there is a risk of electric shock, so disconnect the battery before servicing. Have the installation carried out by a qualified technician to avoid malfunction.
Share
