Stator Crankcase Cover Gasket for Can-Am DS 650 2000-2007
Stator Crankcase Cover Gasket for Can-Am DS 650 2000-2007
SKU:RM08025
Free shipping over £150. Terms apply
Couldn't load pickup availability
Stator Crankcase Cover Gasket for Can-Am DS 650 2000-2007
Brand new side cover and stator gasket - part RM08025 - replaces OEM 711250920 and 420250920
The stator crankcase cover gasket is the seal between the engine case and the stator side cover. It is a simple part with an important job: it keeps engine oil sealed inside the crankcase and keeps water, dust and trail grit away from the stator windings, the pickup coil and the flywheel behind the cover. On the DS 650 the cover has to come off for any charging system work - replacing a stator, checking a pickup coil, pulling the flywheel - and the gasket should be renewed every time rather than reused.
This is a brand new aftermarket side cover and stator gasket cut to the original Can-Am pattern, so the bolt holes and the oil passages line up with the factory case and no trimming, no sealant bead and no modification is required. It replaces OEM part numbers 711250920 and 420250920 and is covered by a one year limited warranty. The item photographs on this listing are accurate representations of the gasket supplied, so if you are in any doubt about fitment, compare them directly against your original part before ordering.
Key Features
- Brand new side cover and stator crankcase cover gasket
- Direct replacement for OEM part numbers 711250920 and 420250920
- Cut to the original pattern - no trimming or modification needed
- Ride specific to the Can-Am DS 650, 2000 to 2007
- One year limited warranty
- Product photographs show the actual item supplied
- The correct part to fit whenever the stator cover is removed
Technical Specs
| Specification | Detail |
|---|---|
| Part number | RM08025 |
| Part type | Stator crankcase cover gasket |
| Condition | Brand new |
| Fitment type | Ride specific |
| Model covered | Can-Am DS 650 |
| Coverage span | 2000-2007 |
| Warranty | 1 year limited |
Vehicle Fitment Guide
Years shown are the overall coverage span for this part. Please confirm against the OEM part number on your original unit before ordering.
| Make & Model | Years |
|---|---|
| Can-Am DS 650 | 2000-2007 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 711250920 | Can-Am |
| 420250920 | Can-Am |
Frequently Asked Questions
Will this fit without modification?
Yes. It is cut to the original Can-Am pattern for the DS 650, so the bolt holes and oil passages line up with the engine case exactly as the factory gasket did. No trimming and no modification is required.
What is included?
One side cover and stator crankcase cover gasket. Cover bolts, seals and the stator itself are not included.
How do I know my old gasket needs replacing?
An oil weep below the stator cover is the usual sign - typically a wet, dirt-caked film running down that side of the engine, or oil collecting on the lower lip of the cover. A gasket that tore on removal, that has gone hard and brittle with heat, or that has taken a permanent set from being torqued down should always be replaced rather than refitted.
How can I be sure it matches my DS 650?
Check the number stamped or printed on your original part against 711250920 and 420250920 in the cross reference table above, and compare the shape of your old gasket with the product photographs. Those two checks together confirm fitment without any guesswork.
Share
