Stator Cover Gasket for Kawasaki Ninja 500 / 900, Vulcan 454 / 500, ER 500 & KLE 500 1985-2009 - 11009-1486
Stator Cover Gasket for Kawasaki Ninja 500 / 900, Vulcan 454 / 500, ER 500 & KLE 500 1985-2009 - 11009-1486
SKU:RMS050-103998
Free shipping over £150. Terms apply
Couldn't load pickup availability
Stator Cover Gasket - Kawasaki Ninja, Vulcan & KLE 500
Ninja 500 / 900, Vulcan 454 / 500, ER 500 & KLE 500 - Replaces 11009-1486
A replacement stator cover gasket for the Kawasaki Ninja 500 / 900, Vulcan 454 / 500, ER 500 & KLE 500. It seals the left-hand engine cover that houses the stator, and is the part to renew whenever the cover is removed for a stator, flywheel or pickup coil job.
Key Features
- Direct replacement for the original stator (magneto) cover gasket
- Seals the stator cover against oil leaks
- Made from quality gasket material
- Recommended whenever the stator cover is removed or the stator is replaced
Technical Specs
| Specification | Detail |
|---|---|
| Part Type | Stator / Magneto Cover Gasket |
| Position | Stator (generator) cover |
| Condition | New |
Vehicle Fitment Guide
Years shown are the coverage span for this part. Please confirm against the OEM part number on your original part before ordering.
| Make & Model | Years |
|---|---|
| Kawasaki ER 500 | 1999-2000 |
| Kawasaki KLE 500 | 1991-2007 |
| Kawasaki Ninja 500 EX500 | 1987-1996 |
| Kawasaki Ninja 500 R | 1997-2009 |
| Kawasaki Ninja 900 | 1985-1990 |
| Kawasaki Vulcan 454 EN450 | 1985-1990 |
| Kawasaki Vulcan 500 EN500 | 1990-2009 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 11009-1486 | Kawasaki |
| 11009-1834 | Kawasaki |
| 11061-0273 | Kawasaki |
Frequently Asked Questions
Should I replace the gasket when I change the stator?
Yes. A used cover gasket rarely reseals properly, so fitting a new one when the stator cover comes off is the easiest way to avoid oil leaks.
Do I need sealant?
The gasket is designed to seal on its own on clean, flat surfaces. Clean both faces thoroughly before fitting.
Share
