Stator Cover Gasket for Yamaha YFM 350 Big Bear, Warrior, Raptor, Moto-4 & Kodiak 400 1987-2013 - 3GD-15451-00
Stator Cover Gasket for Yamaha YFM 350 Big Bear, Warrior, Raptor, Moto-4 & Kodiak 400 1987-2013 - 3GD-15451-00
SKU:RM08001
Free shipping over £150. Terms apply
Couldn't load pickup availability
Stator Cover Gasket - Yamaha YFM 350 & Kodiak 400
Big Bear, Warrior, Raptor, Moto-4 & Kodiak 400 - Replaces 3GD-15451-00-00
A replacement stator cover gasket for the Yamaha Big Bear, Warrior, Raptor, Moto-4 & Kodiak 400. It seals the left-hand engine cover that houses the stator, and is the part to renew whenever the cover is removed for a stator, flywheel or pickup coil job.
Key Features
- Direct replacement for the original stator (magneto) cover gasket
- Seals the stator cover against oil leaks
- Made from quality gasket material
- Recommended whenever the stator cover is removed or the stator is replaced
Technical Specs
| Specification | Detail |
|---|---|
| Part Type | Stator / Magneto Cover Gasket |
| Position | Stator (generator) cover |
| Condition | New |
Vehicle Fitment Guide
Years shown are the coverage span for this part. Please confirm against the OEM part number on your original part before ordering.
| Make & Model | Years |
|---|---|
| Yamaha YFM 350 Big Bear 2x4 | 1996-1998 |
| Yamaha YFM 350 Big Bear 4x4 | 1987-1997 |
| Yamaha YFM 350 Moto-4 | 1987-1995 |
| Yamaha YFM 350 Raptor | 2004-2013 |
| Yamaha YFM 350 Raptor SE | 2005-2007 |
| Yamaha YFM 350 Warrior | 1987-2004 |
| Yamaha YFM 350 Warrior California | 1998-2003 |
| Yamaha YFM 350 Warrior Maine/NH | 1991-1997 |
| Yamaha YFM 400 Kodiak | 1993-1998 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 3GD-15451-00-00 | Yamaha |
| 1UY-15451-00-00 | Yamaha |
Frequently Asked Questions
Should I replace the gasket when I change the stator?
Yes. A used cover gasket rarely reseals properly, so fitting a new one when the stator cover comes off is the easiest way to avoid oil leaks.
Do I need sealant?
The gasket is designed to seal on its own on clean, flat surfaces. Clean both faces thoroughly before fitting.
Share
