Stator Cover Gasket for Yamaha Moto-4, Bear Tracker, Big Bear 250, Bruin 250 & Timberwolf 1983-2009 - 4BD-15451-00
Stator Cover Gasket for Yamaha Moto-4, Bear Tracker, Big Bear 250, Bruin 250 & Timberwolf 1983-2009 - 4BD-15451-00
SKU:RM08021
Free shipping over £150. Terms apply
Couldn't load pickup availability
Stator Cover Gasket - Yamaha 200 / 250 ATVs
Moto-4, Tri-Moto, Bear Tracker, Big Bear & Timberwolf - Replaces 4BD-15451-00-00
A replacement stator cover gasket for the Yamaha Moto-4, Tri-Moto, Bear Tracker, Big Bear & Timberwolf. It seals the left-hand engine cover that houses the stator, and is the part to renew whenever the cover is removed for a stator, flywheel or pickup coil job.
Key Features
- Direct replacement for the original stator (magneto) cover gasket
- Seals the stator cover against oil leaks
- Made from quality gasket material
- Recommended whenever the stator cover is removed or the stator is replaced
Technical Specs
| Specification | Detail |
|---|---|
| Part Type | Stator / Magneto Cover Gasket |
| Position | Stator (generator) cover |
| Condition | New |
Vehicle Fitment Guide
Years shown are the coverage span for this part. Please confirm against the OEM part number on your original part before ordering.
| Make & Model | Years |
|---|---|
| Yamaha YFB 250 Timberwolf | 1992-2000 |
| Yamaha YFM 200 Moto-4 | 1985-1989 |
| Yamaha YFM 250 Bear Tracker | 1999-2004 |
| Yamaha YFM 250 Bear Tracker California | 1999-2000 |
| Yamaha YFM 250 Big Bear | 2007-2009 |
| Yamaha YFM 250 Bruin | 2005-2006 |
| Yamaha YTM 200 Tri-Moto | 1983-1985 |
| Yamaha YTM 225 Tri-Moto | 1983-1986 |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
| Part Number | Manufacturer / Brand |
|---|---|
| 4BD-15451-00-00 | Yamaha |
| 4BD-15451-01-00 | Yamaha |
| 24W-15451-00-00 | Yamaha |
Frequently Asked Questions
Should I replace the gasket when I change the stator?
Yes. A used cover gasket rarely reseals properly, so fitting a new one when the stator cover comes off is the easiest way to avoid oil leaks.
Do I need sealant?
The gasket is designed to seal on its own on clean, flat surfaces. Clean both faces thoroughly before fitting.
Share
