Tilt & Trim Motor for OMC Cobra & Volvo Penta Stern Drive Engines
Tilt & Trim Motor for OMC Cobra & Volvo Penta Stern Drive Engines
SKU:430-22010
Free shipping over £150. Terms apply
Couldn't load pickup availability
Tilt & Trim Motor for OMC Cobra & Volvo Penta Stern Drive Engines
Fits OMC Cobra stern drive 1989-1993 and Volvo Penta 3.0L-8.2L 1994 onward
This tilt and trim motor is a direct replacement for the trim system fitted to OMC Cobra stern drive units from 1989 to 1993, and Volvo Penta 3.0L to 8.2L stern drives from 1994 onward. It is built to OEM specifications for fit, form and function.
The motor terminates in a 2-wire flag connector and is fitted with a flat blade shaft, matching the original equipment configuration used on both applications. It is a bolt-in fit using the original mounting points and connector type, so there is no need to splice or modify the trim harness during installation.
Key Features
- Fits OMC Cobra stern drive, 1989-1993
- Fits Volvo Penta 3.0L-8.2L stern drive, 1994-on
- 2-wire connection with flag connectors
- Flat blade output shaft
- 12-month warranty as standard
Technical Specs
| Specification | Detail |
|---|---|
| Voltage | 12V |
| Part Type | Unit |
| Wiring | 2-Wire (Flag Connectors) |
| Shaft | Flat Blade |
Vehicle Fitment Guide
| Make & Model | Years |
|---|---|
| OMC Cobra Stern Drive | 1989-1993 |
| Volvo Penta 3.0L-8.2L Stern Drive | 1994-On |
OEM Part Number Cross Reference
Aftermarket replacement. OEM part numbers are listed for reference only.
No OEM cross reference is published for this part.
Frequently Asked Questions
Will this fit without modification?
Yes, this motor is a direct OEM-spec replacement for both the OMC Cobra and Volvo Penta stern drive trim systems listed and requires no modification to fit.
What's included?
You will receive one tilt and trim motor, ready to fit into your existing trim system housing. No wiring loom, pump or reservoir is included unless stated, so please compare your existing hardware before fitting.
How do I know my old motor has failed?
Common signs of a failed tilt and trim motor include the drive failing to tilt or trim, a humming noise with no movement, or slow and inconsistent operation. If the trim system moves in one direction only, stalls part-way through its travel, or trips a breaker under load, the motor is a common cause and worth checking first.
Does this fit both OMC and Volvo Penta stern drives?
Yes, this motor is a direct replacement for OMC Cobra stern drives (1989-1993) and was later used on Volvo Penta 3.0L-8.2L stern drives from 1994 onward, using the same flag connector wiring and flat blade shaft.
Share
